ECR-glass Assembled Roving For Chopped Strand Mat

Short Description:

The assembled roving are chopped to certain length and dispersed and dropped on the belt. And then combined with emulsion or powder binder at end through drying, cooling and winding-up the mat are made. Assembled Roving For Chopped Strand mat are designed to use reinforcing silane size and provide excellent stiffness, good dispersion, fast wet-out performance etc. Roving for chopped strand is compatible with UP VE resin. The are mainly used in chopped strand process.

  • Brand name: ACM
  • Place of origin: Thailand
  • Technique: Chopped Strand Mat Production Process
  • Roving type: Assembled Roving
  • Fiberglass type: ECR-glass
  • Resin: UP/VE
  • Packing: Standard International Exporting Packing
  • Application: Chopped Strand Mat/ Low Weight Mat/ Stitched Mat
  • Product Detail

    Product Tags


    It is typically used to manufacture Chopped Strand Mat, Low Weight Mat, and Stitched Mat.

    Product Code

    Filament Diameter


    Linear Density


    Compatible Resin

    Product Features

    Product Application





    Easy to cut
    Good dispersion
    Low electrostatic
    Fast wet-out
    Chopped strand mat



    Low weight mat



    Stitched mat


    1. Good choppability and good gathering.
    2. Good dispersion and lay down.
    3. Low static, excellent mechanical properties.
    4. Excellent mold flowability & wet out.
    5.Good wet-out in resins.


    ·The product should be stored in its original packaging until usage because it works best when used within 9 months after creation.
    ·Care should be taken when using the product to prevent it from being scratched or damaged.
    ·The temperature and humidity of the product should be conditioned to be close or equal to the ambient temperature and humidity respectively before use, and the temperature when the product is used is preferably in a range from 5℃ to 30℃.
    ·Regular maintenance should be performed on the rubber and cutting rollers.


    The fiberglass materials should be kept dry, cold, and moisture-proof unless otherwise stated. The ideal range for temperature and humidity is -10°C to 35°C and 80%, respectively. The pallets ought to be stacked no more than three layers high in order to maintain safety and prevent product damage. It is especially important to move the upper pallet accurately and smoothly when the pallets are stacked in two or three layers.



  • Previous:
  • Next:

  • Write your message here and send it to us